Youtube%E7%99%BD%E5%BA%95%E5%9C%86.png)
2010 C350 4M
Wow I am lucky to find you on google. Your video are so nice and clear.
But I was wonder when you change the brake fluids after. Do you have to press the brake before
you drive the car. So say if you don't do that the car might not stop.
I have an issue with the Nag screen it don't open. I search around and they say pull the fuse 11 and 26 out and insert back and seem it work. But my issue is there is a rectangle button on Nav black cover.
That button usually when you press it and Nav cover will open but it don't work anymore.
I have to use that round volume button to turn off/on for the Nav.
No one seem to know how to fix that. I am in Canada and now I have to follow you Sir to learn how to do
things as reference.
Thanks !
Thank you Sir !
Here you are.
Yes please. right now the Nav still can open and close by pressing the volume round button. I would like to see how to remove the screen just in case. I thank you Sir.
Thanks I reset the command system still no good. I keep my car very clean. Remove the screen is a big job. I assume is the switch might got disconnected somehow.
Thank you, and regarding the replace the brake fluid, there is not necessary to press the brake pedal before driving, because there is no gap between the brake pads and rotors when I replace the brake fluid. But if you replace the brake pads, you must press the brake pedal before driving.
For the Nav screen turn-on issue, you might try to reset the command system to the factory. If it's not working, you might try to remove the screen and disassemble the cover to see if there is damage or just dirt on the hiding switch which can turn the screen on or off.