李先生，你好: 我，王曉鵬，也是在加州，自從在youtube看了你自己動手修理保養車子後，自己也想試試動手修理。 我有個 2003年的 SL55 ，最近一次去維修廠，維修人告訴我車子 left and right lower control arm bushings were broken ，我一直沒有處理，想請教您，如果自己動手更換 either bushings or 整個 control arm ，不知難度如何？及如何更換呢？謝謝！
top of page
To see this working, head to your live site.
Hello Senior Leigh, I used your M278 sparkplug video to begin the process of my valve cover gasket repair, so thank you very much. I've noticed you have provided documents to help people with their jobs. With the coils and plugs removed, I am not 100% sure what to do next. Can you tell me how I can
Oh well I never have such a bad luck on my wife 2010 C350 4M W204. To make this short the driver seat caught a duster and I took the seat cushion off. And notice that the short cable around 63cm was twisted and broken. MS said it cost $ 3,000.00 for the whole base and that what they sell no kidding
Hi Sr, Leigh Any plans documenting the replacement of PCV valve for M276? My truck has about 88,000 miles and is a 2015, so probably would be a good idea to replace it. I think is a bit more complicated than for M272, which I already did for my other car, but for M276 I don't see good tutorials.
Hello Sir. How are you ? I have a question since this Nissan don't really tell me do I need Tranmission flush or replace. It just say inspect. But there is no dipstick to check. I believe the dealership have one that cost over $ 600 to mearsure the fluid level. I was wonder is that ok if I drain the
Can you help me with vin number: 4JG1660571A806938. gle 350 2016 Transmission 722906 08 296494 How many quarts do i need to do the transmission fluid without torque converter? according to wis, adding 6 quarts then 2 more at end? The dealer says 5 1/2 quarts.
2010 and 2012 C350 are they using the same Power Steering Fluid. When I need to change them and some say is life time just top it up if need ( I really don't believe is life time) and under the manual it say Chevron Texaco PSF 9109 and it look like it hard to find. So site say Mercedes 2008 - 2010